JVC RX-D412B - Manuel (Page 44)

English
Using the Surround/DSP modes
Available Surround/DSP modes vary depending on the speaker settings and the incoming signals. See the table below.
• The numbers inside the parentheses following the incoming signal type indicate the number of the front channels and that of
the surround channels. For example, (3/2) indicates that the signals are encoded with three front signals (left/right/center) and
two (stereo) surround signals.
• For EX/ES/PLIIx setting, see page 32.
Incoming Signal Type
EX/ES/PLIIx setting
AUTO ON PLIIx MOVIE PLIIx MUSIC OFF
Dolby Digital
Dolby Digital Surround EX DOLBY D EX* 2, 4 DOLBY D EX* 2
D+PLIIx
MOVIE* 1, 2
D+PLIIx
MUSIC* 2
DOLBY DIGITAL
Dolby Digital (3/2, 2/2) DOLBY DIGITAL DOLBY D EX* 2
D+PLIIx
MOVIE* 1, 2
D+PLIIx
MUSIC* 2
DOLBY DIGITAL
Dolby Digital (3/1, 2/1, 3/0, 1/0) DOLBY DIGITAL
Dolby Digital (Dual Mono) DUAL MONO
DTS
DTS-ES Discrete DTS-ES DSCRT* 2 DTS-ES DSCRT* 2
DTS+PLIIx
MOVIE* 1, 2
DTS+PLIIx
MUSIC* 2
DTS SURROUND
DTS-ES Matrix
DTS-ES
MATRIX* 2
DTS-ES
MATRIX* 2
DTS+PLIIx
MOVIE* 1, 2
DTS+PLIIx
MUSIC* 2
DTS SURROUND
DTS (3/2, 2/2) DTS SURROUND DTS+NEO:6* 2
DTS+PLIIx
MOVIE* 1, 2
DTS+PLIIx
MUSIC* 2
DTS SURROUND
DTS (3/1, 2/1, 3/0, 1/0) DTS
DTS (Dual Mono) DUAL MONO
Analog/LINEAR PCM/Dolby Digital/
DTS (2/0)
PLIIx MOVIE* 3 /
PLIIx MUSIC* 3 /
PLIIx GAME* 3 /
NEO:6 CINEMA/
NEO:6 MUSIC
PLII MOVIE/
PLII MUSIC/
PLII GAME/
NEO:6 CINEMA/
NEO:6 MUSIC
* 1 When “S BACK OUT” is set to “1SPK,” “ D+PLIIx MOVIE” is changed to “DOLBY D EX” and “DTS+PLIIx MOVIE” is changed to
“DTS+ EX.”
* 2 When “S BACK SPK” is set to “NO,” Virtual Surround Back is activated for the modes and the VIRTUAL SB indicator lights up on
the display.
* 3 When “S BACK SPK” is set to “NO,” “PLllx MOVIE,” “PLllx MUSIC,” and “PLllx GAME” are changed to “PLll MOVIE,” “PLll MUSIC,”
and “PLll GAME.”
* 4 For some Dolby Digital Surround EX software, Dolby Digital 5.1-channel reproduction (“DOLBY DIGITAL”) may be applied even
though you have selected “AUTO.” Select “ON” to apply “DOLBY D EX.”
7 All Channel Stereo mode (ALL CH STEREO)
This mode can reproduce a larger stereo sound field using all
the connected (and activated) speakers. This mode cannot
be used if “SURROUND SPK” is set to “NO” in the speaker
setting (see page 30).
Sound reproduced from
normal stereo Sound reproduced from
All Channel Stereo mode
3D HEADPHONE mode
If you connect a pair of headphones while one of the
Surround/DSP modes is in use, the 3D HEADPHONE mode
is activated without respect to the type of software played
back.
• “3D HEADPHONE” appears on the display and the DSP
and HEADPHONE indicators light up.
42
39-44_Surround.indd 42 39-44_Surround.indd 42 06.5.22 4:46:29 PM 06.5.22 4:46:29 PM