Cassette playback, English cassette playback, Loading a cassette – JVC RC-EX30BC Manuel d'utilisation

Page 20

Advertising
background image

17

English

CASSETTE PLAYBACK

Notes on cassette tapes

• Use only type-I normal tapes. The recording/playback

characteristics of this unit are those for normal tapes,
which have different characteristics from CrO

2

and

metal tapes.

• The use of tapes longer than 120 minutes is not

recommended, since characteristic deterioration may
occur and these tapes easily jam in the pinch roller and
the capstan.

• Loose tape may cause trouble. Gently tighten the tape

with a pencil as shown in the figure below.

• To prevent recordings from being accidentally erased,

remove the tab(s) with a screwdriver. After the tabs
have been broken off, reseal the slots with adhesive
tape to erase or re-record.

Loading a cassette

1 Press STOP/EJECT

§ to open the cassette

holder.

2 Load a cassette with the open side up and the

playback side facing out as shown in the figure
below.

+ Forward direction

BAND

TUNER

DISPLAY

PLA

Y/PA

USE

CD

REMOTE
SENSOR

3 Close the cassette holder by pressing it gently and

firmly.
The cassette holder clicks back into position.

Turn the pencil to take up
the slack.

02_01-23_RC-EX30B_C_En.p65

04.8.17, 0:46 PM

17

Advertising