John Deere SA AC-9 - Manuel (Page 8)

8 Wet/Dry Vac Operator's Manual
GROUNDING INSTRUCTIONS:
1. This Wet/Dry Vac must be grounded. If it should malfunction or break down,
grounding provides a path of least resistance for electric current to reduce
the risk of electric shock. This Wet/Dry Vac is equipped with a cord having an
equipment-grounding conductor and grounding plug. The plug must be inserted
into an appropriate outlet that is properly installed and grounded in accordance
with all local codes and ordinances.
Check with a qualified electrician or service person if you are in doubt as to
whether the outlet is properly grounded. Do not modify the plug provided with
the appliance- if it will not fit the outlet, have a proper outlet installed by a
qualified electrician.
2. This Wet/Dry Vac is for use on a nominal 120-volt circuit and has a grounding
attachment plug (See Fig. A). Make sure that the Wet/Dry Vac is connected
to an outlet having the same configuration as the plug. No adapter should be
used with this Wet/Dry Vac.
3. Unroll the Power Cord before plugging it into a grounded outlet.
NOTE: The Wet/Dry Vac is supplied with a Tank Drain, be sure the Drain Cap is
covering the Tank Drain opening before starting the unit. The Wet/Dry
Vac will not operate properly with the Tank Drain open.
INSTALLATION & PREPARATION
GROUNDING
PIN
GROUNDED
OUTLET
RISK OF ELECTRIC SHOCK!
CAUTION
A wound-up power cord
may result in low voltage
and possible overheating
causing a fire.
RISK OF FIRE!
WARNING
If use of an extension
cord is required, use only
extension cords having
an electrical rating not
less than the rating of
the product. Do not use
damaged extension cords.
RISK OF ELECTROCUTION!
WARNING
Improper connection of
the equipment-grounding
conductor can result in a
risk of electric shock.
FIG. A