John Deere SA AC-9 - Manuel (Page 3)

Wet/Dry Vac Operator's Manual 3
INTRODUCTION
Congratulations on the purchase of your new commercial John Deere Wet/Dry Vac! You can be assured your John
Deere Wet/Dry Vac was constructed and designed with quality and performance in mind. Each component has been
rigorously tested to ensure the highest level of acceptance.
This operator's manual was compiled for your benefit. By reading and following the simple safety, installation, operation,
maintenance and troubleshooting steps described in this manual, you will receive years of trouble free operation from
your new John Deere Wet/Dry Vac. The contents of this manual are based on the latest product information available
at the time of publication. The manuafacturer reserves the right to make changes in price, color, materials, equipment,
specifications or models at any time without notice.
! IMPORTANT !
The following "Signal Words" are used throughout this manual to designate the degree or
level of hazard seriousness.
DANGER:
Indicates an imminently hazardous situation which, if not avoided,
WILL result in death or serious injury.
WARNING:
Indicates a potentially hazardous situation which, if not avoided,
COULD result in death or serious injury.
CAUTION:
Indicates a potentially hazardous situation which, if not avoided
MAY result in minor or moderate injury.
The symbol set to the left of this paragraph is a "Safety Alert Symbol". This symbol is used
to call attention to items or procedures that could be dangerous to you or other persons
using this equipment.
ALWAYS PROVIDE A COPY OF THIS MANUAL TO ANYONE USING THIS EQUIPMENT. READ
ALL INSTRUCTIONS BEFORE OPERATING THIS WET/DRY VAC AND ESPECIALLY POINT
OUT THE "SAFETY WARNINGS" TO PREVENT THE POSSIBILITY OF PERSONAL INJURY
TO THE OPERATOR.
Once the unit has been removed from the box, immediately write in the serial number of your unit in the space provided
below.
SERIAL NUMBER_________________________________
Inspect for signs of obvious or concealed freight damage. If damage does exist, file a claim with the transportation
company immediately. Be sure that all damaged parts are replaced an that the mechanical and electrical problems are
corrected prior to operation of the unit. If you require service, contact your Customer Service.
Mi-T-M® Corporation, 8650 Enterprise Drive, Peosta, IA 52068
1-877-JD-KLEEN / (1-877-535-5336) Fax 563-556-1235
Monday - Friday 8:00 a.m. - 5:00 p.m. CST
Please have the following information available for all service calls:
1. Model Number
2. Serial Number
3. Date and Place of Purchase