Assistance or service, Water inlet hoses – Maytag W10277179A Manuel d'utilisation

Page 15

Advertising
background image

15

Always do the following to maintain washer freshness

Use only HE High Efficiency detergent.

Leave the door slightly open after each cycle to allow for
better ventilation and drying of washer interior.

Clean the washer monthly using the Washer Maintenance
Procedure, using 2/3 cup (160 mL) of liquid chlorine bleach.

If the procedure does not sufficiently improve the washer
freshness, please evaluate your installation and usage
conditions for other causes.

Cleaning the exterior

Use a soft damp cloth or sponge to wipe up any spills.
Occasionally wipe the outside of your washer to keep it looking
new. Use mild soap and water. Do not use abrasive products.

Cleaning the dispenser drawer

The dispenser drawer is removable for easy cleaning.

1. Unlock the dispenser drawer by pressing the Release Lever.

Remove the drawer.

2. Remove the inserts (the siphon from the softener and bleach

compartments).

3. Wash the parts under running water.

NOTE: Do not wash components in the dishwasher.

4. Replace the inserts and return the dispenser to the drawer.

Water Inlet Hoses

Replace inlet hoses after 5 years of use to reduce the risk of hose
failure. Periodically inspect and replace inlet hoses if bulges,
kinks, cuts, wear, or leaks are found.

When replacing your inlet hoses, record the date of replacement.

ASSISTANCE OR SERVICE

If you need assistance:

Contact the distributor where the washer was purchased from or
visit www.maytagcommerciallaundry.com.

When you call, have the washer model number and serial
number. Both numbers can be found on the serial-rating plate
located on your washer.

Advertising