Maytag W10277179A - Manuel (Page 12)

12
When exiting set-up code ‘9’, the display must show current day
of week:
CODE EXPLANATION
8. 00 SPECIAL PRICE STOP HOUR
NOTE: Uses military time or 24 hr. clock
8. 00

This is the stop hour; 0-23 hours. Select STOP
HOUR by pressing the PERM PRESS button.
Press the WOOLENS button once to advance
to next code.
9. 10 SPECIAL PRICE DAY
9. 10 This represents the day of the week and whether
special pricing is selected for that day. A number
followed by ‘0’ indicates no selection that particular
day (9.10). A number followed by an ‘S’ indicates
selected for that day (9.1S). To change the value of
‘0’ and ‘S’, use the DELICATES AND KNITS button.
Days of the week (1-7) are selected by pressing the
PERM PRESS button.
DISPLAY DAY OF WEEK CODE (selected)
10
20
30
40
50
60
70
Day 1=
Day 2=
Day 3=
Day 4=
Day 5=
Day 6=
Day 7=
Sunday
Monday
Tuesday
Wednesday
Thursday
Friday
Saturday
1S
2S
3S
4S
5S
6S
7S
 Press the WOOLENS button once to advance
to next code
CODE EXPLANATION
A. 00 VAULT VIEWING OPTION
This option is either SELECTED ‘ON’ or NOT
SELECTED ‘OFF’.
A.
A.
00
SC

Not Selected ‘OFF’.
Selected ‘ON’. Press the DELICATES AND KNITS
button once for this selection. When selected, the
money and/or cycle counts will be viewable (if
counter option(s) is selected) when the coin box is
removed.
Press the WOOLENS button once to advance
to next code.
b. 05 VALUE OF COIN 1
b. 05

This represents the value of coin 1 in number of
nickels: 05 = $0.25.
By pressing the PERM PRESS button, there is a
option of 1-199 nickels.
Press the WOOLENS button once to advance
to next code.
C. 20 VALUE OF COIN 2
C.
C.
20
05

This represents the value of coin 2 in number of
nickels: 20 = $1.00.
PR MODELS ONLY: Factory default of $0.25
By pressing the PERM PRESS button, there is the
option of 1-199 nickels.
Press the WOOLENS button once to advance to
next code.
CODE EXPLANATION
d. 00 COIN SLIDE OPTION
This option is either SELECTED ‘ON’ or NOT
SELECTED ‘OFF’. Replacement of meter case will
be needed for coin slide mounting.
d.
d.
00
CS

Not Selected ‘OFF’.
Selected ‘ON’. NOTE: This option needs to be set
to “00” unless the meter case has been changed to
accept a coin slide device. Press the DELICATES
AND KNITS button 3 consecutive times for this
selection.
When coin slide mode is selected, set ‘b’. equal to
value of vend price in nickels. Set set-up code 6 xx
(regular cycle price) and set-up code 3.xx (special
cycle price) to number of slide operations. If the
installer sets-up 'CS' and a coin drop mechanism is
installed, the washer will not register coins that are
inserted.
Press the WOOLENS button once to advance
to next code.
E. 00 ADD COINS OPTION
This option is either SELECTED ‘ON’ or NOT
SELECTED ‘OFF’. This option causes the customer
display to show the number of coins (coin 1) to
enter, rather than the dollars-and-cents amount.
E.
E.
00
AC

Not Selected ‘OFF’.
Selected ‘ON’. Press the DELICATES AND KNITS
button 3 consecutive times for this selection.
Press the WOOLENS button once to advance
to next code.
F. 00 ENHANCED PRICING OPTION
F.
F.
F.
00
CP
SU

Not Selected ‘OFF’.
Cycle-Based pricing enabled. This option allows
configuration of different prices for cold, warm, and
hot water cycles.
Super Cycle pricing enabled. This option allows
customers to upgrade cycles by depositing extra
money. Set-up codes ‘H.’ and ‘h.’ will be displayed
only when this option is enabled. Press the
DELICATES AND KNITS button for this selection.
Press the WOOLENS button once to advance
to next code.
H. 01 SUPER CYCLE UPGRADE PRICE
(Skipped unless Super Cycle pricing is enabled.)
H. 01

This represents the number of coin 1 required
to upgrade a base cycle to a super cycle. Advance
from 0-39 by pressing the PERM PRESS button.
Press the WOOLENS button once to advance
to next code.
h. 01 SUPER CYCLE TYPE
(Skipped unless Super Cycle pricing is enabled.)
h. 01

This represents the Super Cycle upgrade option.
Press the PERM PRESS button to step through
upgrade options 1 through 3 as follows:
01 - enhanced wash, extra 3 minutes of wash
tumble in addition to the programmed wash time.
02 - extra rinse for all cycles.
03 - both 01 and 02.
Press the WOOLENS button once to advance
to next code.