Maytag W10312954A - Manuel (Page 9)

9
CYCLE GUIDE — TIMED CYCLES
Small loads and Small Load High 18 Wrinkle Prevent † For small loads of 3-4 items.
sportswear Medium
Low
Extra Low
Air Only
Any load Timed Dry High 40 Wrinkle Prevent † Use to dry items to a damp level for items that do
NOTe: Select Air Medium not require an entire drying cycle. Select a drying
Only to dry foam, Low temperature based on the type of fabrics in your
rubber, plastic, or Extra Low load. If you are unsure of the temperature to select
heat-sensitive Air Only for a load, select the lower setting rather than the
fabrics. higher setting.
items to dry: Cycle:
drying
Temperature:
default
Time:
Available
Options: Cycle details:
Settings and options shown in bold are default settings for that cycle.
Not all features and cycles are available on all models.
Not all settings and options are available on each cycle.
CYCLE GUIDE — STEAM CYCLES
Settings and options shown in bold are default settings for that cycle.
Not all settings and options are available on each cycle.
Steam cycles are designed for use with dry loads to loosen wrinkles, remove odors, and refresh fabrics.
load Size recommendations
For best results, follow the load size recommendations noted for
each cycle.
Small load: Fill the dryer drum with 3-4 items,
not more than 1/4 full.
Medium load: Fill the dryer drum up to about 1/2 full.
large load: Fill the dryer drum up to about 3/4 full.
Do not overload. Items need to tumble freely.
+
-
temp level dryness leve
Adjusting drying time on Timed Cycles
When you select a Timed Cycle, the default
time appears in the display. Use the + and –
buttons to increase or decrease the time in 1
minute increments. Press and hold to change
the time in 5 minute increments.
The maximum dry time is 100 minutes.
† Or Wrinkle Prevent with Steam (on some models). Wrinkle Prevent with Steam is available only with High and Medium Drying Temperature settings
Selecting the drying Temperature
A High heat setting may be used for drying heavyweight items
such as towels and work clothes.
A Low to Medium heat setting may be used for drying
medium-weight items such as sheets, blouses, dresses,
underwear, permanent press fabrics, and some knits.
Use a no heat (air dry) setting for foam, rubber, plastic, or heat-
sensitive fabrics.
Line dry bonded or laminated fabrics.
NOTe: If you have questions about drying temperatures for
various loads, refer to the care label directions.
Shirts, blouses, Auto Medium 15 Wrinkle Prevent † Use to reduce odors and light wrinkles from small
and slacks Refresh Reduce Static loads of dry items. Dry time will automatically adjust
when the load size is sensed. Cycle run time cannot
be manually adjusted. Do not add dryer sheets.
Mixed Loads Custom High 22 Wrinkle Prevent † Use to reduce wrinkles, including from loads left in
Refresh Medium Reduce Static the dryer too long. For larger loads, you may add
(on some additional time up to 50 minutes in 5 minute
models) increments using the Timed Dry adjust buttons.
Temperature is selectable. Do not add dryer sheets.
items to
refresh: Cycle:
drying
Temperature:
default
Time:
Available
Options: Cycle details:
† Or Wrinkle Prevent with Steam (on some models). Wrinkle Prevent with Steam is available only with High and Medium Drying Temperature settings.