Parts supplied, Materials you will need, Tools you will need – GE Monogram Built-In Dishwashers Manuel d'utilisation

Page 3: Installation preparation, For new installations only, Materials for new installations only

Advertising
background image

TOOLS YOU WILL NEED:

• Phillips-head screwdriver
• 5/16" and 1/4" nutdriver
• 6" Adjustable wrench
• Level
• Carpenter's square
• Measuring tape
• Safety glasses
• Flashlight
• Bucket to catch water when flushing the line
• 15/16" socket (optional for skid removal)
• Gloves

For New Installations Only:

• Tubing cutter
• Drill and appropriate bits
• Hole saw set

MATERIALS YOU WILL NEED:

• Ferrule, compression nut and 90° Elbow (3/8" NPT

external thread on one end, opposite end sized to fit
water supply)

• Thread seal tape
• UL-Listed wire nuts (3)

Materials For New Installations Only:

• Air gap for drain hose, if required
• Waste tee for house plumbing, if applicable
• Electrical cable or power cord, if applicable
• Screw-type hose clamps
• Strain relief for electrical connection
• Hand shut-off valve
• Water line 3/8" min. copper
• Coupler for extending drain line, if applicable
• GPF10L 10' drain hose, if needed

PARTS SUPPLIED:

• Two #8-18 x 5/8" Phillips special-head

screws, to secure dishwasher to underside
of countertop or sides of cabinets.

• Junction box cover and #10-1/2" hex

head screw

• Side and top trim
• Sound upgrade kit (some models)
• Drain hose (78"), drain hose hanger

and hose clamp

• Literature, Product Samples

and/or coupons

• Hard water test strip

(Models with Bulk Dispenser)

Installation Preparation

3

Wire Nuts (3)

Hot Water Line

Screw-Type

Hose Clamps

Coupler

Hand

Shut-Off

Valve

#8 Phillips Special-Head

Screws 5/8" Long

Hole Saw Set

Measuring Tape

Tubing Cutter

Drill and Bits

Phillips-Head

Screwdriver

15/16" Socket

1/4" and 5/16"

Nutdriver

Safety Glasses

6" Adjustable

Wrench

Bucket

Flashlight

Gloves

Carpenter's

Square

Level

Thread

Seal Tape

GPF10L

10' Drain Hose

Air Gap

Strain Relief

Drain Hose (78")

Hose Clamp

90° Elbow, Ferrule and

Compression Nut

Electrical Cable

(or Power Cord, if applicable)

Waste Tee

Trim Pieces

#10 Hex Head

J-Box Screw

1/2" Long

Drain Hose Hanger

Hard Water Test Strip

(Models with Bulk Dispenser)

Sound Upgrade

Kit (Some Models)

Side Trim

Top Trim

Side Trim

Junction Box Cover

Advertising