Installation refrigerator instructions, Before you begin, Important – GE GBC12 Manuel d'utilisation

Page 8: Model gbc12

Advertising
background image

LEVELING LEGS

Adjustable legs at the front corners of the refrigerator
should be set so the refrigerator is firmly positioned on
the floor, and the front is raised just enough that the door
closes easily when opened about halfway.

To adjust the leveling legs, turn the legs clockwise to
raise
the refrigerator, counterclockwise to lower it.

If you have questions, call 1.800.561.3344

or

visit our Website at:

geappliances.ca

.

To raise the refrigerator

Installation

Refrigerator

Instructions

Model GBC12

BEFORE YOU BEGIN

Read these instructions completely and carefully.

IMPORTANT –

Save these instructions for

local inspector’s use.

IMPORTANT –

Observe all governing codes

and ordinances.

Note to Installer –

Be sure to leave these

instructions with the Consumer.

Note to Consumer –

Keep these instructions for

future reference.

• Skill level – Installation of this appliance requires basic

mechanical skills.

• Completion time – Refrigerator Installation

15 minutes
Reversing the Door Swing
1 hour

• Proper installation is the responsibility of the installer.

• Product failure due to improper installation is not covered

under the Warranty.

REFRIGERATOR LOCATION

• Do not install the refrigerator where the temperature will

go below 55°F (13°C) because it will not run often enough
to maintain proper temperatures.

• Install it on a floor strong enough to support it

fully loaded.

• Do not install it closer than 5” (13 cm) next to a range.

CLEARANCES

For optimal performance of your refrigerator, the following
clearances are recommended:

• Sides

3

/

8

” (0.9 cm)

• Top 1” (2.5 cm)

• Back 2” (5 cm)

8

INSTALLING THE HANDLES

Remove the plug buttons from the left side of the doors.
Install the handles using the screws provided, and snap
screw covers in place.

Advertising