Curtis FRF707 - Manuel (Page 5)

4
Location of Parts
1. Top cover
2. Wire shelves
3. Front leg
4. Adjustable leg
5. Thermostat
6. Door
INSTALLATION INSTRUCTIONS
1. Before using your appliance
a. Remove the exterior and interior packing, including the foam base and all adhesive tape.
To remove any remaining tape or glue, rub the area briskly with your thumb. Tape or
glue residue can also be easily removed by rubbing a small amount of liquid dish soap
over the adhesive with your fingers. Wipe with warm water and dry.
b. Do not use sharp instruments, rubbing alcohol, flammable fluid or abrasive cleaners to
remove tape or glue. These products can damage the surface of your refrigerator.
c. When moving the appliance, do not tilt it more than 45° from the upright position.
d. Before connecting the appliance to the power source, let it stand upright for
approximately 30 minutes. This will reduce the possibility of a malfunction in the cooling
system from handling during transportation.
e. Clean the interior surfaces with lukewarm water using a soft cloth.