Curtis RFR835 - Manuel (Page 8)

7
Fixing and moving
1. The refrigerator should be laid at solid level place. The two fronts should be adjusted to
make the refrigerator stable. The legs should be fully contacted with the ground to avoid
vibration and noise.
2. Do not place the refrigerator near a heat source or expose it to direct sunlight. If the
refrigerator is placed near a heat source an insulation plate must be used and the
following minimum distance between the refrigerator and the source of heat must be
observed:
-30cm from another electrical appliance not used for cooking
-30cm from a stove or other cooking facility
3. The refrigerator should be placed in a dry and well-ventilated room. A distance of over
100mm from wall, 300mm from the top and 200mm from both sides of the refrigerator
should be kept for proper air circulation. The ventilation inlet and outlet grills and other
airways must never be covered. And a clear space should be left to open its doors to 160
o
.
(As chart)
4. When fixing refrigerator, the foaming package should be cancelled. (Including the
foaming bottom)
5. When moved, the refrigerator cannot be declined to bigger than 45
o
or upside down. (As
chart)