Curtis RFR835 Manuel d'utilisation

Page 10

Advertising
background image

9

troubleshooting

Not every problem is serious enough to warrant calling sales service staff. Before calling for
help, please check if the problem can be solved with the aid of the following tips:

 Unusual noises:

1. Check if the refrigerator is standing firmly on level ground, and if the fixtures are all

secure. Also, the pipes at the lower back of the refrigerator should not be touching
each other, and the compressor should not be in contact with other objects.

2. Check if the drain pan put off .

 No cooling:

Check the power supply for power cut; burnt-out fuse; plug not fitting in the socket or
wrong Voltage.

 Lamp not working:

The lamp may have burnt out. If this happened replace it with a 10W/115V lamp.

 Deterioration of cooling performance:

Check that the setting on the thermostat knob is not too warm, that the door is closed

properly, that thick layers of ice have not built up in the freezer, that the door isn’t being
opened too frequently, that too much food hasn’t been placed in the refrigerator or that
food which is too warm is not being placed in the refrigerator.

 Stop working:

Check if there is a power failure, power voltage is low excessively, power plug make
contact well and temperature regulator points to position “0”.

 Food frozen in cold-storing chamber:

Check if the temperature control dial may set too big, and if the stowed food contact with
the cold source of cabinet back.

 The water overflowed after defrosting:

Check that the drain hole is not blocked, and the drain pan is fixed properly.

 Normal phenomena:

1.

Dew may appear on the exterior of the refrigerator if the external humidity is
high. This can be wiped dry.

2.

The area where the door seal sticks to the refrigerator may be warm. This is
caused by the heating device to avoid dew and frost.

3.

A bubbling/ rattling noise sometimes could be heard. This is due to
refrigerant flowing in the cooling pipe or because the refrigerator is in
start-up or closing mode.

4.

The temperature of the compressor can reach 80

O

C.

Advertising
Ce manuel est liée aux produits suivants: