页面 46, Dvd operation, Appendix – Curtis LCDVD241FR Manuel d'utilisation

Page 46: Function settings, Troubleshooting

Advertising
background image

41

Function Settings

DVD OPERATION

40

DIGITAL

TROUBLESHOOTING

Attempt the following steps to diagnose the symptom you have seen. If the
symptom couldn’t be corrected, please contact the dealer.

The Symptom of Trouble

Possible causes

Correct measures

Symptom

There are spots on the
screen, and the sound
is not clear when you
watch TV.

The picture is doubled
or tripled,
but sound is good.

Disturb Intermittent

No picture & No sound

1. The antenna cables may be

disconnected.
2. The antenna cables may be

disconnected or cankered.
3. The antenna cables may be

weak.
4. The weather is bad.
5. The transmitter is wrong.

1. The antenna cables may be

weak.
2. The television could not

tune correctly.
3. The weather is bad
4. The transmitter is wrong.
5. Television input incorrectly.

Your unit is being affected by
other television, automobiles,
fluorescent lamps,
portable radio.

1. Television is under AV mode.
2. The picture and volume are
set to minimum.
3. The television is under sleep
mode or electricity-saving mode.

1. Connect antenna cables

again or change the plug.
2. Connect antenna cables

again or change new cables.
3. Adjust antenna again.
4. There is no need to correct.
5. Check with local operator.

1. Adjust antenna again.
2. Search channels again or

adjust television.
3. There is no need to correct.
4. Check with local operator.
5. Check the outside devices.

Check the shield contains of
television and put the
television as far away as
possible through cables.

1. Check the picture/sound
control (enter main menu).
2. Make sure power in on.

APPENDIX

Advertising