DCS CS-485GD - Manuel (Page 10)

BEFORE USING YOUR APPLIANCE
9
TO INSERT THE OVEN RACKS:
1) Hold the rack with the back safety rail in the up
position and towards the rear of the oven. Slip it
into the oven so the rack slides are between the
rack and the rack guides.
2) As you slide the rack into the oven, tip the front of
the rack up slightly, so that the safety stops on the
back of the rack clear the rack slides. The safety
stops keep the rack from sliding out of the oven
when pulled forward. See Fig. 01
TO REMOVE OR REPOSITION THE RACKS:
1) Pull the rack forward.
2) Lift the front of the rack up so the safety stops
clear the rack slides.
3) Pull the rack forward.
Rack Positions
4
3
2
1
4
3
2
1
Rack
slide
Fig. 01
Rack
guide
Safety stop