Philips 10000104 - Manuel (Page 28)

2 6 \ PROGRAMMING THE MACHINE
Descaling cycle
MENU>r :-e > i
To perform the automatic descaling cycle.
Descaling is necessary every 2-3 months, depending on the volume of use and hardness of the local water
supply.The machine must be turned on and will automatically manage the distribution of the descaling agent.
A PERSON MUST BE PRESENT DURING THE OPERATION.
WARNING! NEVER USE VINEGAR AS A DESCALER.
Saeco descaler is recommended, however you can use a non-toxic and/or non-harmful descaling product for coffee
machines, commonly available online or in coffeeshops. The solution used must be disposed of according to the
manufacturer’s instructions and/or according to regulations in force in the country of use.
Note: Before beginning the descaling cycle make sure that:
1. a container of adequate dimensions is positioned under the water spout and the brew group;
2. THE “AQUA PRIMA” FILTER HAS BEEN REMOVED. „ m
3. The water tank has been filled with the descaling solution up to the level indicated with ana'll.
Pause descaling.
The descaling and/or rinsing can be paused and then restarted. When descaling Is Interrupted the machine will
warn the user that it must be turned off.
WARNING! DESCALING MUST BE COMPLETED WITHIN 24 HOURS FROM ITS INTERRUPTION.
The next time the machine Is turned on, the machine will warn the user that the descaling and/or rinse process
must be completed.
The machine indicates to the user the need to perform the descaling
throughaflashing message.
This message is displayed every 100 beverages made from the last
descaling.
This does not blockthe machine’s operation.
The counter located on the right of the “descale” key is decreased each
time a product is dispensed.
30 beverages before blocking, the display will begin to flash.
When the available beverages are
finished, the machine blocks and
must be descaled.
Run descaling cycle as described.