Philips 10000104 - Manuel (Page 17)

BEVERAGE PROGRAMMING 15
Every beverage can be programmed according to your own tastes.
1. PROGRAMMING FOR SELF-INSTRUCTING
For all beverages you can quickly program the quantity ot coffee and/or milk dispensed in the cups whenever
the key is pressed.
Select the type of beverage you want to program, then press and hold fhe^^ key until the display shows
(for example):
self-instruct. activated
espresso coffee
The machine dispenses coffee or milk.
When the required amount is reached, press the
The display will show:
key again.
new quantity saoed
espresso coffee
(Only beverages with coffee and milk): for beverages with coffee and milk, you need to store the desired
quantify (during the relevant dispensing) by pressing fhe^P’ key.
The dispensed quantify of coffee and/or milk remains stored and replaces any previous settings.
2. PROGRAMMING FROM THE “BEVERAGE SETTINGS” MENU
To set the beverage making parameters: press the^NU key and select ‘
turning the selection disc with a finger:
In this phase you can:
exit the program
mode.
By sliding the disc with a finger
you can change the settings for: ■
- the quantify of coffee dispensed
(1 square = approx. 15 ml);
- the quantify of milk dispensed
(1 square = approx. 15 ml);
- the coffee temperature;
- the coffee prebrewing.
..... \
0
Select the coffee
aroma
r
restore factory settings
Variable function, based on
the programming level.
Save the new settings.
For completeness purposes, the following page describes how to program a product containing milk and coffee; the
parameters to set to program each beverage may differ according to the type of beverage.