Chicago Electric PORTABLE FLUORESCENT WORKLIGHT 94761 - Manuel (Page 3)

English Page 3 94761 For technical questions, please call 1-800-444-3353.
prong or modify the plug in any way. do not use any adapter plugs. Check with
a qualified electrician if you are in doubt as to whether the outlet is properly
grounded. If the lights should electrically malfunction or break down, grounding
provides a low resistance path to carry electricity away from the user.
double insulated lights are equipped with a polarized plug (one blade is wider
than the other). This plug will fit in a polarized outlet only one way. If the plug
does not fit fully in the outlet, reverse the plug. If it still does not fit, contact
a qualified electrician to install a polarized outlet. do not change the plug
in any way. Double insulation eliminates the need for the three wire grounded
power cord and grounded power supply system.
Avoid body contact with grounded surfaces such as pipes, radiators, ranges,
and refrigerators. There is an increased risk of electric shock if your body is
grounded.
do not abuse the Power Cord. Never use the Power Cord to carry the lights or
pull the Plug from an outlet. Keep the Power Cord away from heat, oil, sharp
edges, or moving parts. Replace damaged Power Cords immediately. Dam-
aged Power Cords increase the risk of electric shock.
When operating a light outside, use an outdoor extension cord marked “W-A”
or “W”. These extension cords are rated for outdoor use, and reduce the risk of
electric shock.
PERSONAL SAFETy
do not overreach. Keep proper footing and balance at all times. Proper footing
and balance enables better control of the light in unexpected situations.
Use safety equipment. Always wear eye protection. Dust mask, nonskid safety
shoes, hard hat, or hearing protection must be used for appropriate conditions.
Always wear ANSI-approved safety goggles and a dust mask/respirator when per-
forming maintenance on this light.
LIGHT USE ANd CARE
Use the correct light for your application. Do not use the light for a purpose for
which it is not intended.
disconnect the Power Cord Plug from the power source before making any
adjustments, changing accessories, or storing the light. Such preventive safety
measures reduce the risk of starting the light accidentally.
Always unplug the light
from its electrical outlet before performing any inspection, maintenance, or
cleaning procedures.
Store idle lights out of reach of children and other untrained persons. Lights
are dangerous in the hands of untrained users.
2.
3.
4.
5.
1.
2.
1.
2.
3.