RCA VR270 Manuel d'utilisation
Page 11
Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".
When you use these connections the A-B switch is
used to select either the converter output or the VCR
output. This arrangement will let you use your VCR
as a “remote-controlled converter box" when you are
© Disconnect Cable-TV from converter, © Connect splitter to converter.
© Disconnect TV from converter cable. © Connect splitter to VCR.
© Connect Cabie-T\' to input of splitter. © Connect converter to A-B switch.
not recording, as explained below the diagram.
Note: The VCR will not be able to record scrambled
channels with this hookup. To record scrambled
channels, use hookup D.
© Connect VCR to A-B switch.
© Connect A-B switch to TV.
Viewing any cable-TV channel while you record some
other channel with the VCR.
Viewing all scrambled channels.
Viewing cable charmels when the VCR is turned off.
(Cable channels 2 through 13 can also be viewed with the
VCR turned off and the A-B switch set to position “B,")
• Playing a recording.
.
• Viewing a nonscrambled channel at the same time you
are recording it (channel selected with the VCR tuner).
Note; When you set the A-B switch to "B," tune your TV to
the same channel that you have selected on the back of your
VCR (3 or 4). This is called the “VCR channel" throughout
this manual.
-or-
D.
the converter boxes, both for recording and normal
TV viewing.
This system requires two “converter boxes” from
your cable-TV company, and there may be an
additional charge. All channels must be selected with
© Disconnect Cable-TV from convener. © Connect splitter to each of the conveners. © Connect VCR to A-B switch.
© Disconnect TV from convener cable. © Connect one converter to A-B switch. © Connect A-B switch to TV.
© Connect Cable-TV to input of splitter. ® Connect other converter to VCR.
• Viewing any cable-TV channel while you record some
other channel with the VCR.
• Viewing any cable-TV' channel when your VCR is turned
off.
Note: When you set the A-B switch to “B,” tune your TV to
VCR (3 or 4). This is called the “VCR channel” throughout
• Playing a recording.
• Viewing any channel at the same time you are recording
it. Select the channel with the converter that is connected
to the VCR, and tune the VCR to the output channel of
the converter (usually 3 or 4).
the same channel that you have selected on the back of your
this manual.