Connection of ac power supply – Panasonic PanaFlat LC40 Manuel d'utilisation
Page 11
Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".
CONNECTION of AC Power Supply
If the AC power is in the range 100 to 240V AC, 50 HZ or 60 Hz the supplied AC Adapter
(Part number TNQX010) will automatically switch to the proper setting.
Precaution:
• In order to use the display unit safely, use a power cable that is supplied and make sure it is
property grounded.
• AC plug cords for the following countries are supplied with the AC Adapter.
U.S.A... UL
Canada... CSA
For use in other countries, make sure the AC cord meets the safety standards of each country.
Power Cord Connection
^ Use the accessory AC adapter and line cord.
M Connect the DC plug on the DC power cord from the AC
™ Adapter into the DC IN connector on the display unit.
Note: Always use the accessory AC adapter (part number:
TNQX010). Never use any other AC adapter.
Insert the power cord into the hook on the base immediately
below the DC IN connector.
w a
Connect the AC Female Receptacle (CEE-22) Type end on the
■“ AC line cord to the AC adapter.
n Connect the Male Plug (NEMA5-15) style directly into a
“ property polarized and grounded socket.
H Attach the cable compartment cover.
Figure 1
"Female Receptacle CEE-22 Type
Figure 2
"Male Plug NEMA5-15 style
- 6 -