Panasonic TL350 - Manuel (Page 8)

Parts and Their Functions
o e
O
Camera switching output connector
Camera switching output connector; connect it to
the frame switcher.
0 Audio input/output connectors
Audio input/output connectors {phono jacks)
0
Video input/output connectors
Video input/output connectors (BNC); connect the
input connector to the video camera, etc. and the
output connector to the TV monitor, etc.
O AC IN connector
Connect the supplied power cord to an AC outlet.
0 Alarm input connector
Alarm recording input connector; connect it to the
external sensor.
0
COMMON terminal
0
Alarm reset connector
Input connector for releasing alarm recording: a +4
to +14 V DC voltage is required.
O REC IN connector
Input connector for recording.
0
Tape end output connector
When the cassette tape comes to its end during
recording, the alarm device installed externally is
activated.
0 WARNING/REC output connector
When trouble has occurred in the unit, the alarm
device installed externally is activated.
Error warning or recording low signal selected on
the menu screen 3 is output.
0 GND terminal
This terminal is connected to the signal ground
terminal of the connected unit in order to reduce
noise. It is not connected to ground for safety
purposes.
0 MIC input jack
Input jack (mini-jack) for an external microphone.
This jack has precedence when signals are supplied
simultaneously to this jack and the audio input
connectors.
0 REMOTE control connector
For connecting the AG-A11 remote controller which
is available as an optional accessory.
0 Battery installation area
Install the battery in this area. See “Lithium Battery”
on page 2.
8