Panasonic TL350 - Manuel (Page 19)

Alarm Recording (Emergency Recording)_____
prolonged monitoring and recording, the alarm function is When an emergency occurs at the monitoring site during
automatically triggered, and alarm recording is performed.
Principle of alarm recording
Alarm input Alarm reset input
Tape start ’ ' Tape end
. K
12/24 hours 2/6 hours 12/24 hours ^
Time lapse mode Alarm mode Time lapse mode
When an alarm signal is supplied by an alarm sensor
(door or intercom switch, etc.) during recording in a
time lapse mode, the recording speed is switched to
the 2“ or 6'hour mode and the details of the state of
emergency are faithfully recorded.
Alarm and display methods during
alarm recording
ALARM display lamp
When an alarm signal is supplied, the alarm display
lamp functions as follows.
Alarm
tamp
On Flashing Off
Alarm input Alarm recording
has finished.
Power switch
is pressed.
Connecting the alarm input connector
Alarm recording starts when the alarm switch is set
on. When the alarm reset switch is set ON after
recording has started, alarm recording is released
and operation is returned to the original time lapse
recording mode.
Alarm recording can be released by pressing the
STOP button during alarm recording.
However, it cannot be released even by pressing the
STOP button if the MENU/REC LOCK switch is at
REC LOCK or INT is lighted on the display.
Alarm recording can be automatically reset without
supplying the alarm reset input signal.
The reset time can be set for 0.5, 1, 2, 3, 5 or 10
minutes.
Another option is alarm recording only while the alarm
input signal is supplied.
Alarm recording is also possible as far as the end of
the tape.
When the alarm mode is OFF, alarm recording is not
possible even if the alarm switch is set to ON.
19