Timer recording, Internal timer recording, Note – Panasonic TL350 Manuel d'utilisation

Page 16

Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".

Advertising
background image

Timer Recording

There are two methods of timer recording: one uses the internal timer and the other uses an external timer.

Internal timer recording

start time and stop time

Bear in mind the following points when setting these

times.

• When the stop time is set later than the start time:

Recording will commence at the start time on the day

concerned and stop at the end time on the same day.

Example: 8:30 -> 17:00

• When the start time is set later than the stop time:

Recording starts at the start time on the day con­

cerned and ends at the stop time on the following day.

Example: 17:00

8:30

• When the start time and stop time are the same

(for weekly recording);

Recording starts at 8:30 on the day concerned and
ends at 8:30 on the following day.

Example: 8:30 -> 8:30

To record for an entire day, set the start time and stop

time to 0:00.

Weekly recording (weekly timer) can be set by the
day of the week.
When (INTERNAL TIMER REC) on Menu Screen

5 is set to OFF for both the weekly timer and daily

recording (daily timer), nothing appears for the

start or stop time. Timer recording is considered

not to be set.

VTR operations after the settings

• The unit’s power is turned off, and even if other but­

tons are pressed, their operations are not accepted.

• When the start time and stop time have not been set,

INT flashes on the display.

Releasing the internal timer mode

Set the TIMER MODE switch to OFF to clear INT on the

display.

Note:

• Since it takes some moments for recording to start,

set the start time for timer recording one minute
earlier.

Internal timer recording operation

O

Check that a video cassette with its tab intact has

been inserted.

0 Check that the TV monitor shows the correct pres­

ent time.

0

Set the MENU/REC LOCK switch to MENU to

display the menu screens. Press the page button
so that the INTERNAL TIMER REC timer setting
screen appears on the TV monitor.

[INTERNAL TIMER REC]

P5

[TIMER]START END

T-M

SUN OFF

MON OFF

TUE OFF

WED OFF

THU OFF

FRI OFF

SAT OFF

DLY OFF

O Set the operation times of the internal timer.

• For details on the settings, refer to the sections

on “Daily timer'’ or “Weekly timer." (See page 17.)

© Upon completion of the settings, set the MENU/

REC LOCK switch to OFF. The regular screen is
restored.

© Set the TIMER MODE switch to INT TIMER so that

INT lights on the display.

When the time and date for Menu Screen 1 have

not been set, a cassette has not been inserted, the

timer has not been set, or when a cassette with a

broken out tab has been inserted, the buzzer
sounds and INT flashes on the display.

16

Advertising