Panasonic TL350 - Manuel (Page 10)

Menu Screens
MENU SCREEN 3
The alarm recording mode and terminal output are set on Menu Screen 3.
0
Alarm recording mode selection (see page 20)
The recording mode in the event of an alarm input
is selected. {OFF 2H 6H <-> OFF...)
2H/6H: When there is an alarm input, the recording
time mode is switched to 2H or 6H (alarm recording)
and the details of the alarm status are recorded
faithfully.
OFF: Alarm recording is not possible even when an
alarm signal is input during recording.
0 Alarm recording duration setting
This sets the time elapsing from the start of alarm
recording until its end. (30 SEC 1 MIN ^ 2 MIN
<-> 3 MIN ^ 5 MIN 10 MIN CONTINUE
MANUAL ^30 SEC...)
CONTINUE: Alarm recording continues until the
tape end.
MANUAL: Alarm recording is performed while the
alarm input continues.
MENU SCREEN 4
Recording mode and video output are selected on Menu Screen 4.
Alarm recall (see page 20)
This checks the input times (up to 4) of the alarm
signals.
0 Terminal connector output signal setting
ERR WARN: When trouble has occurred in the unit
(AUTO OFF), the LOW signal is output.
REC: The LOW signal is output during recording.
Recording time mode selection
When recording starts, the set time mode is always
established.
(OFF 2H 6H 12H ^ 24H ^
OFF...)
OFF: Any time mode can be set using the TIME
MODE button on the front panel. It can be changed
even white recording is in progress.
<D Selection of VTR operation when cassette is
inserted
STOP: Stop mode
REC: Simply by inserting the cassette tape, record­
ing is started automatically.
REW ► REC: When the cassette is inserted, it is
first rewound to the start of the tape and then
recording is started automatically.
0 Selection of operation when tape end is de­
tected during recording (see page 18)
STOP: Stop mode
REW: The tape is automatically rewound to the
start where it stops.
MENU SCREENS
The internal timer recording modes are set on Menu Screen 5.
0
Internal timer recording mode setting (see page
16)
This sets the weekly timer or daily timer recording
mode. (OFF/ON)
OFF: Internal timer recording is not set.
ON: Internal timer recording is set. (The start and
stop times are set.)
REPEAT: The tape is automatically rewound to the
start, and recording is repeated.
EJECT: The tape is ejected. ,
Video signal mode
This selects the operation of the color/black-and-
white automatic selector circuit.
AUTO: The circuit automatically identifies the type
of video input or playback signals, and selects the
color or black-and-white mode accordingly.
COLOR: The color mode is forcibly established.
B_W: The black-and-white mode is forcibly
established.
Playback picture quality selection
The outlines of the playback images can be
emphasized.
OFF: Regular mode
ON: The playback picture has emphasized outlines.
Note:
Internal timer recording does not operate when the
date and time have not been set.
10