Vintage Cellars MPRO6WCM (Professional) - Manuel (Page 20)

MPRO3WCM AND MPRO6WCM WINE CELLAR FEATURES
20
Insert Wine Bottles
The roll-out shelves each hold from 4 or 8 bottles per rack de-
pending on model. See Figure 20 and 21 for typical wine bottle
spacing. Care should be taken when storing extra tall bottles in
the wine cradle at the bottom of the compartment because they
may prevent the door from closing.
Loading Tips and Suggestions
Keep wines that you plan to use for everyday drinking and enter-
taining on the front half of the racks where labels are completely
visible. Place wines for aging or longer term storing in the rear.
Roll-out Racks
The roll-out wine racks may be pulled out approximately 14
inches to facilitate adding or removing bottles. Do NOT lean on
or press down heavily on the wine shelves. Doing so may dam-
age the shelves and the wine bottles stored on them. Pull the
wine racks out gently and carefully to minimize unsettling your
wine collection. Avoid pulling out more than one rack at any
time to maintain stability.
The single level roll-out racks allow you to easily view and access
your inventory without disturbing other bottles.
Figure 20
MPRO3WCM 4 bottles of wine per rack
Figure 21
MPRO6WCM
8 bottles of wine per rack