Step 2: setting the time, To correct the clock setting, About the time indication – Sony CMT-M11C Manuel d'utilisation
Page 6: Step, Setting the time
Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".
step 2: Setting the
time
You must set the time beforehand to use the
timer function.
4
Set the current minute by pressing
TIMER + or - and press ENTER.
The clock starts working,
To correct the clock setting.
Repeat steps 1 through 4.
About the time indication
• The built-in clock shows the time in the display
when you press power to turn off the power.
• The upper dot of the in the time display flashes
for the 0 to 29 seconds and the lower dot flashes
for the 30 to 59 seconds.
1
Press TIMER SET.
2
Press TIMER + or - to display
"CLOCK" and press ENTER.
The hour indication begins flashing.
I 2 ; 0 C P M
3
Set the current hour by pressing
TIMER + or - and press ENTER.
The minute indication begins flashing.
8 : 1 0 P M
T
:£A/