Sony CMT-M11C - Manuel (Page 18)

Labeling a CD
You can label up to 30 CDs using up to 12
symbols and characters on each CDs.
Whenever you load the labelled CD, the label
(disc name) appears in the display. If you
label a CD and do a CD synchro recording on
a brand-new MD, the CD's name is
automatically recorded on the MD.
When you using the remote set the MD/
TAPE switch to MD.
3 4, 9 7, 8
SONY »99 Ф »
9 9 9
1
Press FUNCTION repeatedly until
"CD" appears, then place a CD.
2
Press DISC SKIP repeatedly until
the desired DISC 1-3 indicator
lights up green.
3
Press EDIT/NO until "Name in ?"
appears.
4 Press YES.
The cursor starts flashing.
C D 3
Press and ►►►►I on the
MD deck at the same time (or
CHARACTER on the remote)
repeatedly until the desired type of
character appears.
Each time you press the button, the
display changes as follows:
A (Upper cases) —► a (Lower cases) —► 0
(Numbers) —► ! (Symbols)* —►
(Space)
-►A...
*You can use the following symbols.
L_j (Space)
Press or ►►►►! on the
MD deck (or until or for
MD on the remote) the desired
character appears.
The selected character flashes. To enter a
blank space, press CURSOR —► on the
MD deck (or ►► for MD on the remote)
while the cursor is flashing.
Ш
C D 3
l '