Labeling the preset stations, You can use the following symbols – Sony CMT-M11C Manuel d'utilisation
Page 37
Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".
other Features
Labeling the preset
stations
— station Name
You can put a name of up to 10 characters
(Station Name) to a preset station. The
Station Name appears when you tune in the
station.
Set the MD/CD/TUNER switch on the
remote to TUNER.
1
6. 7
4
Press EDIT/NO until "Name in ?"
appears.
5
Press YES.
The cursor starts flashing.
4
5, 10 8
AM I
Press
and ►►►►! on the
MD deck at the same time (or
CHARACTER on the remote)
repeatedly until the desired sort of
character appears.
Each time you press the button, the
display changes as follows:
A (Upper cases) —► a (Lower cases) —*• 0
(Numbers) —► ! (Symbols)* —►
(Space)
-►A...
*You can use the following symbols.
1
Press BAND repeatedly until the
band you want appears.
2
Press TUNING MODE repeatedly
until "PRESET" appears.
3
- Press TUNING + or - until the
preset number of the station you
want to label appears.
uj (Space)
Press !◄◄ ◄◄ or ►►►►! (»◄◄ or
►►I
for MD on the remote) until the
desired character appears.
To enter a blank space, press CURSOR
—► (or ►► for MD on the remote) while
the cursor is flashing.
38
EN