Notes, Setting the md deck output, Switching the bit length – Sony MDS-JB920 Manuel d'utilisation

Page 34: Adjusting the playback level [x, Note, Playing mds

Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".

Advertising
background image

Finely controlling the pitch (Fine Control
Function)

You can fine control the playback speed in 0.1%
increments from -98.5% to +12.5%.

1

While the deck is playing, press MENU/NO twice

to display "Setup Menu".

2

Turn AMS to select "Setup 11", then press AMS.

3

Turn AMS to select the desired "Pfine"

percentage, then press AMS.

4

Press MENU/NO.

Notes

• The playback sound drops out momentarily when you

change the fine control value.

• The fine control setting returns to the initial value (0%)

when you turn off the deck or eject the MD.

• The step and fine control values are linked; changing one

value also changes the other.

Setting the MD Deck Output

Switching the bit length

You can improve the output sound quality by
switching the bit length to match the MD deck or DA
converter connected to the digital output connector.

MENU/NO IKK AMS ООН

1

While the deck is stopped, press MENU/NO

twice to display "Setup Menu".

2

Turn AMS to select "Setup 13", then press AMS.

3

Turn AMS to select the desired bit length, then

press AMS.

4

Press MENU/NO.

Playing MDs

Notes

• This function operates only for the digital signal output

through the digital output connector

• You can select the desired bit length from 24, 20 or 16 bits.
• If vou switch the bit length during playback or recording,

the sound drops out momentarily.

You can also switch the bit length with the remote [JJ

Press D.O BIT repeatedlv during play or in stop mode
until the desired bit length is displayed.

Adjusting the playback level [x]

You can adjust the playback level of the signal output
to the LINE (ANALOG) OUT jacks and the PHONES
jack.

(SiCD O CD CD

DIGITAL REG LEVEL
/ANALOG OUT LEVEL+/-

Press DIGITAL REG LEVEL/ANALOG OUT LEVEL
+ /- during play.
(You cannot raise the level above 0 dB, or lower the
level below -20 dB.)

Note
The playback level setting returns to "0 dB" when you turn

off the deck or eject the MD.

33"

Advertising