Sony MDS-JB920 - Manuel (Page 20)

Recording on MDs
Fading In and Out (Fader)
You can gradually increase the recording level at the
begimiing of a recording (fade-in recording) or
gradually decrease the recording level at the end of a
recording (fade-out recording).
This fuiiction is convenient when, for example, you
don't want the track cut off abruptly when the disc
reaches to its end.
S
O OD
FADER
<3DCDCDCDCD
OD a
S S‘S (?)
FADER
Fade-in recording
During recording pause, press FADER at the position
where you want to start fade-in recording.
◄ in "Fade ◄ 3.2s" flashes and the deck performs the
fade-in recording until the counter reaches "0.0s".
Fade-out recording
During recording, press FADER at the position where
you want to start fade-out recording.
► in "Fade ► 3.2s" flashes and the deck performs the
fade-out recording until the counter reaches "0.0s".
The deck changes to recording pause when fade-out
recording finishes.
You can set the duration of fade-in and fade-out
recording independently
1 while the deck is stopped, press MENU / NO twice to
display “Setup Menu".
2 To set the duration of fade-in recording:
Turn AMS to select “Setup 08“, then press AMS.
To set the duration of fade-out recording:
Turn AMS to select “Setup 09", then press AMS.
3 Turn AMS to set the duration.
Both the fade-in and fade-out recording durations can
be set in 0.1 second steps.
4 After selecting the duration, press AMS.
5 Press MENU/NO.