Dell 5130cdn Color Laser Printer - Manuel (Page 392)

3. Select Chart Print from the left list.
4. Click the 4 Colors Configuration Chart button.
The 4 Colors Configuration Chart is printed.
Does this solve your problem?
Pitched color dots
Action Yes No
1
Locate the cause of the problem using the Pitch
Configuration Chart.
1. Start Tool Box. For how to start Tool Box, see
" Understanding Your Printer Software ."
The Tool Box opens.
2. Select Chart Print from the left list.
3. Click the Pitch Configuration Chart button.
The Pitch Configuration Chart is printed.
4. Compare the pitch of the color spots on your output
with that on the Pitch Configuration Chart, and
locate the cause of the problem.
Is the cause of the problem located?
Proceed to the action corresponding to the
location of the problem:
Drum cartridge - 2
Fuser - 3
Belt unit - 4
Contact
Dell.
2
Replace the drum cartridge if you have a spare.
1. Replace the drum cartridge. See " Replacing the Drum
Cartridges ."
2. After you replace the drum cartridge, start Tool Box.
For how to start Tool Box, see " Understanding Your
Printer Software ."
The Tool Box opens.
3. Select Chart Print from the left list.
4. Click the Pitch Configuration Chart button.
The Pitch Configuration Chart is printed.
Does this solve your problem?
The task is complete. (The drum cartridge
you are using has been damaged. Replace it
with a new one.)
Contact
Dell.
3
Replace the fuser if you have a spare.
1. Replace the fuser. See " Replacing the Fuser ."
2. After you replace the fuser, start Tool Box. For how to
start Tool Box, see " Understanding Your Printer
Software ."
The Tool Box opens.
3. Select Chart Print from the left list.
4. Click the Pitch Configuration Chart button.
The Pitch Configuration Chart is printed.
Does this solve your problem?
The task is complete. (The fuser you are
using has been damaged. Replace it with a
new one.)
Contact
Dell.
4
Replace the belt unit if you have a spare.
1. Replace the belt unit. See " Replacing the Belt Unit ."
2. After you replace the belt unit, start Tool Box. For how
to start Tool Box, see " Understanding Your Printer
Software ."
The Tool Box opens.
The task is complete. (The belt unit you are
using has been damaged. Replace it with a
Contact