Dell 5130cdn Color Laser Printer - Manuel (Page 157)

following illustration.
The amount of the bending shall be 5mm or less.
Using the MPF
Load only one size and type of print media during a single print job.
To achieve the best possible print quality, use only high-quality print media that is designed for use in laser
printers. For more guidelines on print media, see " Print Media Guidelines ."
Do not add or remove print media when there is still print media in the MPF or when the printer is printing from the
MPF. This may result in a paper jam.
Print media should be loaded with the recommended print side down and the top of the print media going into the
MPF first.
Do not place objects on the MPF. Also, avoid pressing down or applying excessive force on it.
The icons on the MPF identify how to load the MPF with paper, and how to turn an envelope for printing.
Linking Trays
The printer automatically links the trays when you load the same size and type of print media in them. The first tray will
be utilized until the media runs out after which the next tray will be used.
NOTE: The print media should be the same size and type in each tray.
The Multipurpose Feeder (MPF) cannot be linked to any of the tray sources.
After loading the selected trays with the same size and type of print media, select the Paper Type setting in the Tray
Settings
component for each source (tray).
To disable tray linking change the Paper type in one of the sources (trays) to a unique value.
NOTE: If different types of print media of the same size are loaded in each tray, the printer will automatically link
them if the paper type is not specified in the printer driver properties/preferences.
Using the Duplex Function
Duplex printing (or two-sided printing) allows you to print on both sides of a sheet of paper. For sizes that are acceptable
for duplex printing, see " Supported Paper Sizes ."