Rockwell Automation 1747-DPS1, 1747-DPS2 Port Splitter Installation Instructions - Manuel (Page 22)

22 Port Splitters
Publication 1747-IN516B-EN-P - October 2007
Specifications
RS-232/DF1 Port Splitter- 1747-DPS1, 1747-DPS2
Attribute Value
1747-DPS1 1747-DPS2
Power supply requirements 100 mA @ 24V dc Class2/SEL V 100 mA @ 24V dc
Isolation No Yes
Controller port communication
rate and checksum 8-pin DIN, autobaud @ 19.2 Kbps
or 38.4 Kbps
auto-sum BCC or CRC 9-pin male D-shell, autobaud @
19.2 Kbps or 38.4 Kbps
auto-sum BCC or CRC
Network port communication rate
and checksum 8-pin DIN, DF1 full-duplex
19.2 Kbps/CRC 9-pin male D-shell,
6-pin Phoenix-style connector for
DH-485
configurable for DH-485, DF1
half-duplex (master or slave), DF1
full-duplex, or DF1 radio modem
networks.
The communication parameters
are also configurable.
Prog/HMI port communication rate
and checksum 9-pin male D-shell, 19.2 Kbps/CRC 9-pin male D-shell, 19.2 Kbps/CRC
Status indicators 4 4
Dimensions (HxWxD) without DIN
rail, approx. 96.8 x 50.6 x 33.3 mm
(3.81 x 1.99 x 1.31 in.) N/A
Dimesions (HxWxD) with DIN rail,
approx. 96.8 x 50.6 x 33.3 mm
(3.81 x 1.99 x 1.31 in.) 101 x 35 x 70 mm
(3.98 x 1.38 x 2.75 in.)
Environmental Specifications
Attribute Value
Temperature, operating IEC 60068-2-1 (Test Ad, Operating Cold),
IEC 60068-2-2 (Test Bd, Operating Dry Heat),
IEC 60068-2-14 (Test Nb, Operating Thermal Shock):
0…60 o C (32…140 o F)
Temperature, storage IEC 60068-2-1 (Test Ab, Unpackaged Nonoperating Cold),
IEC 60068-2-2 (Test Bc, Unpackaged Nonoperating Dry Heat),
IEC 60068-2-14 (Test Na, Unpackaged Nonoperating Thermal Shock):
–40…85 o C (–40…185 o F)
Relative humidity IEC 60068-2-30 (Test Db, Unpackaged Damp Heat):
5…95% noncondensing