Install the 1747-dps1 port splitter to a din rail – Rockwell Automation 1747-DPS1, 1747-DPS2 Port Splitter Installation Instructions Manuel d'utilisation
Page 13
Advertising
Port Splitters 13
Publication 1747-IN516B-EN-P - October 2007
Install the 1747-DPS1 Port Splitter to a DIN Rail
1. Determine your spacing requirements.
2. Mount the DIN rail to your mounting surface.
3. Align the port splitter to the mounting plate, and snap the port splitter into
place.
4. Pull the latch down and hook the top slot of the mounting plate over the
DIN rail.
50.6 mm
(1.99 in.)
39.3 mm
(1.55 in.)
86.9 mm
(3.42 in.)
96.8 mm
(3.81 in.)
1747-DPS1 Splitter
Port Splitter
Mounting Plate
DIN Rail
Latch
Advertising