Rockwell Automation 1747-DPS1, 1747-DPS2 Port Splitter Installation Instructions - Manuel (Page 21)

Port Splitters 21
Publication 1747-IN516B-EN-P - October 2007
Remove the Port Splitter
To remove the port splitter from the DIN rail, place a screwdriver in the DIN rail
latch at the bottom of the port splitter. While holding the port splitter, pry
downward on the latch until the port splitter is released from the rail.
To remove the 1747-DPS1 port splitter from the mounting surface, unscrew the
screws.
Interpret the Status Indicators
The port splitter has four status indicators.
Additional Resources
You can view or download publications at
http://literature.rockwellautomation.com. To order paper copies of technical
documentation, contact your local Rockwell Automation distributor or sales
representative.
Indicator State Description
OK Flashing green or red Port splitter is turning on and auto-configuring.
Solid green or red Port splitter is on and operational.
Controller Flashing red Controller port is transmitting DF1 data.
Flashing green Controller port is receiving DF1 data.
Network Flashing red Network port is transmitting data.
Flashing green Network port is receiving data.
Prog/HMI Flashing red Prog/HMI port is transmitting DF1 data.
Flashing green Prog/HMI port is receiving DF1 data.
DIN Rail