Rockwell Automation 1747-DPS1, 1747-DPS2 Port Splitter Installation Instructions - Manuel (Page 17)

Port Splitters 17
Publication 1747-IN516B-EN-P - October 2007
.
IMPORTANT
For the 1747-DPS1 port splitter, refer to the Port Isolation table to determine
isolation requirements for Allen-Bradley controllers and operator interface
devices.
Cables Used to Connect to the Programming Port
This port for the 1747-DPS1
and 1747-DPS2 port splitter Connects to With this cable
Programming/HMI port
(9-pin D-shell) Personal computer
(9-pin D-shell) 1747-CP3 (3 m, 10 ft)
1756-CP3 (3 m, 10 ft)
1761-CBL-AC00 (0.5 m, 1.5 ft)
PanelView 300 through
PanelView 1400 terminals and
PanelView PLUS terminal
(9-pin D-shell) 2711-NC13 (5 m, 16 ft)
2711-NC14 (10 m, 32 ft)
2706-NC13 (3 m, 10 ft)
PanelView Micro terminal
(8-pin mini DIN) 1761-CBL-AP00 (0.5 m, 1.5 ft)
1761-CBL-PM02 (2 m, 6.5 ft)
2711-CBL-PM05 (5 m, 16 ft)
2711-CBL-PM10 (10 m, 32 ft)
1761-NET-AIC port 1
(9-pin D-shell) 1747-CP3 (3 m, 10 ft)
1761-CBL-AC00 (0.5 m, 1.5 ft)
1761-NET-AIC port 2
(8-pin mini DIN) 1761-CBL-AP00 (0.5 m, 1.5 ft)
1761-CBL-PM02 (2 m, 6.5 ft)