Philips 10002498 - Manuel (Page 9)

7
3
4
1 2
5 6
7 8 9
Remove the “Aqua Prima” water
fi lter from its packaging. Enter the
date of the current month.
“AQUA PRIMA” WATER FILTER
To improve the quality of the water you use, and guarantee longer machine life at the same time, it is
recommended that you install the “Aqua Prima” water fi lter. After installation, go to the fi lter initialization
program (see programming). In this way, the machine advises the user when the fi lter must be replaced.
Insert the fi lter in its place within the
empty tank (see fi gure); Press down
until it clicks into place.
Pres again.
When the machine has fi nished, turn the knob until it is in the rest position ( ). Press a few times until the
“exit” message is displayed. Then press . The machine is now ready for use.
Fill the tank with fresh drinking
water. Let the fi lter soak in the full
tank for 30 minutes for correct
initialization.
Place a container beneath the
steam/hot water spout.
Press .
Select “maintenance” and press the
button.
Select “activate” and press the
button.
Turn the knob to the position.
Water dispensing begins.
1 bev. settings 3 maintenance
3.1 filter 3.1.3 activate
execute now
1.
2.
1.
2.