Philips 10002498 - Manuel (Page 27)

25
1 2 3
6 4
7 8 9
5
Descaling is carried out at a controlled temperature. If the machine is cold, you must wait until it has reached the
right temperature; otherwise you must cool the boiler as follows:
Note: before beginning the descaling cycle make sure that:
1. a large enough container is positioned under the water spout;
2. THE “AQUA PRIMA” FILTER HAS BEEN REMOVED.
Turn the knob to the
reference.
Place a container beneath the
steam spout.
When the following message
appears, the heater is at the right
temperature
If the boiler needs to be heated, the machine does so automatically. When the heating stage is complete, the
“open water knob” message appears. Then proceed as described in point 5.
3 maintenance 3.2 descaling 3.2.2 descaling
execute now
open
water knob
insert descaler
ok to start
Pour the descaling solution into
the tank. Insert the tank into the
machine.
Press the button to start.
insert descaler
ok to start
1. 1. 1.
2. 2. 2.