32 error codes – Philips 10002498 Manuel d'utilisation

Page 34

Advertising
background image

32

ERROR CODES

GUIDE MESSAGE THAT APPEARS

HOW TO REMOVE THE MESSAGE

out of service (xx)
restart to fix…

Where (xx) identifi es an error code.Turn off and after 30
seconds turn the machine on again to restore normal operation.
If the problem persists, call the service centre and give the code
(xx) shown on the display.

close coffee bean lid

Close the coffee bean hopper cover to be able to make a
beverage.

fill container with coffee

Put coffee beans into the bean hopper.

insert the brew group

Insert the Brew Group in its place.

insert grounds drawer

Insert the coffee grounds drawer.

empty grounds

Warning that does not block the machine. Proceed as for the
next alarm.

empty grounds drawer

Remove the grounds drawer and empty the grounds into an
appropriate container (See page 30 steps 1 and 2).
Note: The grounds drawer must be emptied only when the
machine requires it and when the machine is turned on. If
you empty the drawer with the machine turned off it will not
record the emptying operation.

close door

In order for the machine to operate, the side door must be
closed.

fill the water tank.

The tank must be removed and refi lled with fresh drinking water.

empty drip tray

Open the side door and empty the drip tray located under the
Brew Group.
Warning: if this operation is performed when the machine is
on, it will record the coffee grounds drawer emptying and
will reset the relative counter; therefore, it is necessary to
empty the coffee grounds as well.

change the filter

The Aqua Prima fi lter must be replaced in the following cases:
1. 60 litres of water have been dispensed;
2. 90 days have passed since its installation;
3. 20 days have passed and the machine has not been used.

Note: this message only appears when “on” has been selected
in the water fi lter function (See page 21).

carafe missing

milk island missing

The steam knob has been turned to the

position and either

the Milk Island has not been installed or the carafe is not
positioned correctly. Install the Milk Island or position the carafe
correctly.
Otherwise, turn the knob until it is in the rest position ( ).

descale

A descaling cycle must be performed on the machine’s internal
circuits.

stand-by…

Press the

button.

Advertising
Ce manuel est liée aux produits suivants: