Philips 10002684 - Manuel (Page 31)

28
coffee
cleaning
cycle
maintenance
descaling
cycle
lock
display
mAINTENANCE
To clean/maintain all of the machine’s internal circuits, press the “maintenance” icon on the main
programming menu.
In this menu you can:
begin the wash cycle of the brew
group.
perform the descaling cycle.
begin rinsing the milk
circuits.
lock the touch screen (to perform
cleaning of the display).
mILK CIRCUIT RINSE CYCLE
to rinse the machine’s internal circuits used for preparing milk.
This short cycle must be performed after 20 minutes from the last dispensing of a beverage with milk.
If it is not performed, the machine comes to a halt and does not allow the dispensing of milk beverages.
before performing this function make sure that:
1. a large enough container is positioned under the spout.
2. the milk container has been correctly inserted in the machine.
3. the water tank contains a suffi cient quantity of water.
Press the "milk rinsing cycle" button and then "start rinsing" to start the milk circuit rinse cycle.
Wait for the cycle to fi nish.
The machine will return to the main
menu.
remove the container, rinse and
dry.
milk
cleaning
cycle
milk circuit
rinsing
cycle
begin washing the milk
circuits.
rinsing...
rinsing milk circuit-
please wait
milk circuit
rinsing
cycle
start
rinsing
go back
back to
menu
AfTER USE, ALWAYS REmOVE THE mILK CONTAINER AND PUT IT IN THE REfRIgERATOR.
The container may be left in the machine only if it has been washed with drinking water and it does not contain milk;
see page 41.
WARNINg! DO NOT OPEN THE SERVICE DOOR DURINg THE bREWINg, DISPENSINg, WASHINg
OR RINSE CYCLE.
prograMMIng The MaChIne