Philips 10002684 - Manuel (Page 10)

7
5 6
9
4
1 3 2
Remove the small white fi lter
from the tank and store it in a dry
place sheltered from dust.
Fill the tank with fresh drinking
water and reinsert it into the
machine.
set the intenza aroma system:
A = Light water
B = Medium water (standard)
C = Hard water
For further details see page 21.
INTENZA WATER fILTER
To improve the quality of the water you use, and extend the life of your machine at the same time, it is
recommended that you install the water fi lter. After installation, go to the water fi lter menu to initialize (see
programming).By activating the water fi lter, the machine informs the user when the water fi lter must be
replaced.
remove the water fi lter from its packaging, immerse it vertically (with the opening facing upwards)
in cold water and gently press its sides so as to let the air bubbles out.
Insert the fi lter in the empty tank.
the reference mark and the
groove must match. Push fi rmly
until it is completely inserted.
press "machine settings". Press "water fi lter". Press "water fi lter activation".
water
fi lter
inserted
not
inserted
water fi lter
activation
The machine performs the water fi lter activation. Wait until the cycle stops automatically.
At the end of the activation cycle, the machine returns to the product selection menu. Do not use the water
dispensed during this phase.
noTe: If the Intenza water fi lter is not available, insert the small white fi lter previously removed (see
point 1) into the tank.
Place a container beneath the
hot water spout.
press "programming menu".
show icon
explanation
my custom
coffee
program-
ming
menu
main-
tenance
main
menu
specials
machine
settings
clock
settings
extras
beverage
settings
stand-by
back to
coffee
menu
alerts &
acoustic
settings
machine
settings
display
language
rinsing
water
hardness
water
fi lter
cup
illumination
cup
warmer
go back
restore
default
settings
back to
menu
go back
restore
default
settings
back to
menu
save
settings
8 7