Bosch MistCare Nexxt Series - Manuel (Page 6)

6
INSTALLATION INSTRUCTIONS
Introduction
Read these installation instructions
completely and carefully. They will save
you time and effort and help to ensure
optimum dryer performance. Be sure to
observe all listed warnings and
cautions.
d WARNING
WARNING - Risk of Fire.
- Clothes dryer installation must be
performed by a qualified installer.
- Install the clothes dryer according
to the manufacturer's instructions
and local codes.
- Do not install a clothes dryer with
flexible plastic venting materials. If
flexible metal (foil type) duct is
installed, it must be of a specific
type identified by the appliance
manufacturer as suitable for
clothes dryers. Flexible venting
materials are known to collapse,
be easily crushed and trap lint.
These conditions will obstruct
clothes dryer airflow and increase
the risk of fire.
- To reduce the risk of severe injury
or death, follow all installation
instructions.
- SAVE THESE INSTRUCTIONS.
In addition to these instructions the
dryer must be installed in accordance
with all local codes or, in the absence
of a local code:
-
In Canada, in accordance with the
Canadian Electric Code C22.1 ć
latest edition/Provincial and
Municipal codes and/or local
codes.
Information concerning
waste disposal
Disposal of the packaging
d WARNING
Keep children away from
shipping carton and packaging
components. Danger of
suffocation from plastic foil and
folding cartons.
All packaging materials are
environmentally friendly and can be
reused. Please dispose of packaging in
an environmentally friendly manner.
Please ask your dealer or inquire at
your local authority about the current
means of disposal.
Disposal of the old appliance
d WARNING
If appliance is no longer usable,
pull out main plug, cut off power
cord and discard with main plug.
To prevent children from locking
themselves in the appliance,
remove the door.
Old appliances are not worthless
rubbish! Valuable raw materials can be
reclaimed from environmentally friendly
recycling.
Please ask your dealer or inquire at
your local authority about the current
means of disposal.
Before installing the dryer
Before installing the dryer to a
previously used ductwork system make
sure the system is clean. Professional
ductwork cleaning is recommended
annually and also when attaching your
dryer to a previously used ductwork
system.
Maintaining clean ductwork will reduce
drying time and will improve drying
performance.
Unpacking the appliance
d CAUTION
The dryer is very heavy. Do not
lift it by yourself. Do not lift the
appliance by projecting
components (e.g. door) ć due to
risk of breakage.
NOTICE
Remove the appliance
packaging carefully to prevent
damage to the surfaces.
Check the dryer for transportation
damage. Do not install a dryer which is
visibly damaged. If in doubt, contact
your dealer.
Supplied components
NOTICE
After removing the packaging,
immediately remove any objects
from the drum .