Accessories, Preparing to transport the dryer ć step by step – Bosch MistCare Nexxt Series Manuel d'utilisation

Page 15

Advertising
background image

15

Accessories

The following optional accessories for

your dryer may be obtained from

customer service (see page 26) or from

your local dealer. Please follow the

installation instructions supplied by the

appropriate manufacturer.

Side exhaust kit

part no. WTZ 1265
Note:

See notes on maximum number of

elbows on page 14.

i

A special tool is required for cutting
the exhaust hole in the dryer side

panel.

For further information please

contact your local dealer.

Bottom exhaust kit

part no. WTZ 1270
Note:

See notes on maximum number of

elbows on page 14.

Dryer rack

part no. WTZ1290
Use the dryer rack to dry washable

woolen textiles (e.g. sweaters) and

shoes.

Left hinge kit

part no. WTZ1260 for white
part no. WTZ1260S for solid silver tone

and for duo-tone color
The door is hinged on the right side at

the factory. The door catch can be

reversed if necessary. Please contact

your dealer or our customer service

team (see page 26)

Pedestal Mounting Kit

8 inch pedestal accessory number
WTZ 1295 for solid white color
WTZ 1295S for solid tone silver
WTZ 1295P for duo tone silver/white
15 inch pedestal accessory number
WTZ 1500 for solid white color
WTZ 1500S for solid tone silver
WTZ 1500P for duo tone silver/white
WTZ 1500C for duo tone

champagne/white
If mounting the dryer on the pedestal

follow the instructions supplied with the

pedestal before proceeding any further.

Preparing to transport the

dryer ć step by step

i

These procedures should only be
performed by a qualified person.

1. Rotate the program selector

to "OFF".

2. Disconnect the power supply (turn

circuit breaker off, unplug the

appliance)

3. Turn off the water faucet

connected to the water supply

hose. Disconnect the water

supply hose.

4. Disconnect the exhaust duct from

the exhaust air outlet on the dryer.

5. Collect any accessories and

package them for shipment with

the appliance.

6. Close the door and secure with

adhesive tape.

7. Screw the heightĆadjustable feet of

the dryer into the housing to

prevent them from being damaged

during transportation.

8. Reinstallation of the Dryer at the

New Location - refer to the

Installation Instructions in this

manual (see page 6).

Advertising