Breville XXBKC600XL - Manuel (Page 7)

12 13
NOTE:
There are two sharp needles that
puncture the K-Cup
® . One on the
underside of the Brewing Chamber
head and the other in the base of
the K-Cup
® holder. To avoid risk of
injury, do not put your fingers in the
Brewing Chamber or K-Cup
® holder.
Lower the Safety Locking Arm to 7.
close the Brewing Chamber Head
over the K-Cup
® Holder. When closed
completely, the LCD screen will indicate
‘READY TO BREW’. The and
buttons will illuminate and the ‘BREW’
button will illuminate and flash for up to
60 seconds.
OpERATING YOUR BREVILLE GOURMET SINGLE CUp BREwER™
BREwING A K-CUp ®
Follow the instructions, Installing the 1.
Water Filter (page 9) and the One-time
Priming Process (page 10). The Brewer
should be turned on and the Water
Tank should be filled and illuminated.
The LCD screen will indicate ‘READY 2.
TO BREW’. The and buttons
will illuminate and the ‘BREW’ button
will illuminate and flash for up to
60 seconds.
NOTE:
If the ‘BREw’ button is not pressed
in 60 seconds, the LCD screen
will indicate ‘OpEN hEAD’ and the
‘BREw’ button will be disabled to
prevent accidental activation. To
re-activate the brew sequence,
open the Brewing Chamber head
by raising and lowering the Safety
Locking Arm completely.
Place a cup or mug on the Drip Tray 3.
Plate. The drip tray plate and drip tray
can be removed to accomodate taller
mugs and travel mugs.
Raise the Safety Locking Arm. The 4.
Brewing Chamber will open toward you.
Select a K-Cup 5. ® .
Place the K-Cup 6. ® in the K-Cup ®
Holder (located in the Brewing
Chamber). Do not remove the foil lid
or puncture the K-Cup
® .
NOTE:
If the ‘BREw’ button is not pressed
in 60 seconds, the LCD screen
will indicate ‘OpEN hEAD’ and the
‘BREw’ button will be disabled to
prevent accidental activation. To
re-activate the brew sequence,
open the Brewing Chamber head
by raising and lowering the Safety
Locking Arm completely.
The LCD screen will indicate 8.
‘BREWING’, however there may be a
short pause before the brewing process
begins. The process lasts about 60
seconds and ends with a burst of air to
remove all liquid from the K-Cup
® .
OpERATING YOUR BREVILLE GOURMET SINGLE CUp BREwER™
a) The LCD screen will indicate the
default brew size (7.25 oz.). To choose
a different size, press the button to
go up in size or the button to go
down in size.
NOTE:
Select from a stronger small cup
(5.25 oz. serving), a small mug (7.25
oz. serving), a large mug (9.25 oz.
serving), a travel mug (11.25 oz.
serving) or iced beverage setting
(3.25oz serving). The iced beverage
setting is only available on the the
BKC700XL.
The small mug (7.25 oz. serving) is
the default brew size.
To program your favorite brew size,
refer to Setting the ‘BREw SIZE’
feature (page 24).
NOTE:
To use the iced beverage setting,
place a tall glass filled with ice on the
drip tray. Use your favorite K-Cup
® ,
select the iced beverage brew size
button. Add more ice once brewing
is complete, add cream and sugar if
desired. The iced beverage setting is
only available on the BKC700XL.
b) Once the brew size is selected, press
the ‘BREW’ Button. The ‘BREW’
button will stop flashing, the and
buttons will no longer be lit. The LCD
screen will indicate ‘BREWING’ and
the selected brew size.