Breville XXBKC600XL - Manuel (Page 15)

28 29
CLEANING ThE wATER FILTER
Regular cleaning of the Water Filter is
recommended. We suggest doing this
when the Charcoal Filter is replaced every
2 months or 60 tank refills.
Disassemble the Water Filter by removing 1.
the Lower Filter Holder from the Upper
Filter Holder. Discard the Charcoal Filter.
Wash the Upper and Lower Filter Holder 2.
in warm soapy water with a soft cloth,
then rinse and dry thoroughly. Both parts
are also top-shelf dishwasher safe.
NOTE:
Replace the Charcoal Filter every
2 months, or 60 tank refills, more if
you have hard water.
To order replacement Charcoal Filters,
call Breville Customer Service on
1-866-BREVILLE or visit www.breville.com.
We recommend removing the Water Filter
if you choose not to replace the Charcoal
Filter every 2 months, as the filter may clog
and affect the smell and taste of the water.
DESCALING ThE BREwER
Mineral content in water varies from place
to place. Depending on the mineral content
of the water in your area, calcium deposits
or scale may build up in your Brewer.
Scale is non-toxic, but left unattended,
it can hinder the Brewer’s performance.
Descaling your Brewer helps maintain the
heating element, and other internal parts of
the Brewer that come in contact with water.
CARE & CLEANING CARE & CLEANING
CLEANING ThE MY K-CUp ®
ACCESSORY
Regular cleaning of the My K-Cup ®
accessory is recommended.
Remove the assembled My K-Cup 1. ®
Holder from the Brewer by raising the
Safety Locking Arm. Use caution as
the My K-Cup
® Holder will be hot.
Disassemble the My K-Cup 2. ® Holder by
removing the Lid from the Holder in a
counter-clockwise direction. Remove the
Filter Basket from the Holder, discard
the grounds.
Wash the Lid, Filter Basket and Holder in 3.
warm soapy water with a soft cloth, then
rinse and dry thoroughly. All My K-Cup
®
parts are topshelf dishwasher safe.
Store the assembled My K-Cup 4. ® Holder
in the My K-Cup ® Storage compartment
located on top of the Brewer.
CLEANING ThE wATER TANK
AND LID
Wipe the Water Tank Lid with a soft, 1.
damp cloth then dry thoroughly. The Lid
should not be put into the dishwasher.
Wash the Water Tank in warm soapy 2.
water with a soft cloth, then rinse and
dry thoroughly. Do not dry the inside of
the Tank with a cloth as lint may remain.
The Water Tank should not be put into
the dishwasher.
NOTE:
Rinse the water Tank thoroughly
after cleaning to ensure that no
cleaners or cleaning solutions
remain as they may contaminate
the water supply in the Brewer.
NOTE:
Do not use water that has been
treated by a 'water softener'. The
increase in sodium levels in the
water can cause scaling in the
brewer and hinder its performance.
The Brewer should be descaled every
3-6 months to ensure optimal performance.
It is possible for calcium deposits to build
up faster, making it necessary to descale
more often.
This Brewer is equipped with sensors to
detect when scale buildup is interfering with
the performance of the Brewer. When this
is detected, the LCD screen will indicate
’DESCALE’.
NOTE:
The Brewer will continue to operate
even when the LCD screen indicates
‘DESCALE’.
However, if you do not descale the Brewer
soon after it is displayed, continued scale
build-up could damage the Brewer. If this
occurs, ‘DESCALE’ will begin to flash,
alerting you to the potential damage to the
Brewer if you do not descale immediately.
Promptly follow these steps each time the
LCD screen indicates ‘DESCALE’ to ensure
the Brewer functions optimally.
Empty the Water Tank. 1.
Pour vinegar into the Water Tank, filling 2.
up to the 'MAX' mark on the water tank
viewing window.
Place a 12 oz. or larger ceramic cup 3.
(do not use a plastic cup) on the Drip
Tray. The Drip Tray and Drip Tray Plate
can be removed to accomodate taller
mugs and travel mugs.
Select the largest brew size (11.25 oz. 4.
serving) by pressing the button on the
control panel.
Run a cleansing brew without a K-Cup 5. ®
(refer to Brewing Hot Water, page 18).
Pour the contents of the cup into the sink.
Repeat the cleansing brew process until 6.
the Water Tank is empty, pouring the
contents of the cup into the sink after
each cycle. Remember to raise and
lower the Safety Locking Arm between
each cycle so the control panel buttons
illuminate.
Let the Brewer stand for at least 7.
4 hours while still on.
Rinse the Water Tank thoroughly and fill 8.
with fresh water.
Place a 12 oz. or larger ceramic cup (do 9.
not use a plastic cup) on the Drip Tray.
Run a cleansing brew without a K-Cup 10. ®
(refer to Brewing Hot Water, page 18).
Pour the contents of the cup into the sink.
Repeat the cleansing brew process 11.
until the Water Tank is empty, pouring
the contents of the cup into the sink
after each cycle. You may need to
perform additional rinse cycles if you
notice any residual taste. Remember to
raise and lower the Safety Locking Arm
between each cycle so the control panel
buttons illuminate.
Disconnect the power plug from the 12.
wall outlet for at least 15 minutes, then
re-plug the power cord into the wall
outlet. The machine is now ready to use.
NOTE:
If the LCD screen continues to
indicate ‘DESCALE’ after completing
the process, repeat the 'Descaling
the Brewer' process (page 28).