Breville XXBKC600XL - Manuel (Page 12)

22 23
SETTING ThE ‘ON-OFF TIME’
FEATURE
This feature allows you to program
the specific time when the Brewer will
automatically turn on and/or off. By
programming your Brewer to automatically
turn on, you will not have to wait for the
Brewer to heat the water in the Water
Tank. It will take the Brewer approximately
3½ minutes to heat the water from room
temperate.
NOTE:
You must set the clock if using the
‘ON-OFF TIME’ feature.
An alternative to setting the
‘ON-OFF TIME’ feature is to leave
the Brewer on all the time.we
recommend this so your Brewer is
always ready to brew a fresh cup of
gourmet coffee, tea or hot cocoa.
To turn the Brewer off at any time,
press and release the power Switch
on the lower back, right side of the
Brewer. The clock will remain on if
set, however you can not activate
the brew cycle. press and release
the power Switch again to restore
power to the Brewer. You will have
to wait for the water to heat up
before the Brewer is ready to brew.
Press the ‘MENU’ button. The menu 1.
programming options will appear on the
LCD screen with a blinking indicator on
‘CLOCK SET’.
Press the button to reach ‘ON-OFF 2.
TIME’.
Press the ‘OK’ button. 3.
MENU & pROGRAMMING OpTIONS
Press the or button to see the 4.
two options:
a) ‘ON-OFF TIME’ will be ‘INACTIVE’,
indicating that the Brewer will not
turn on or off automatically. Press the
‘OK’ button to select this option. The
LCD screen will return to the menu
programming options.
b) ‘ON-OFF TIME’ will be ‘ACTIVE’,
indicating the Brewer will automatically
turn on and/or off according to the
specific times you set. Press the ‘OK’
button to select this option.
Setting the ‘ON TIME’
i) The LCD screen will display ‘ON TIME’,
indicating that the time you wish the
Brewer to automatically turn on is
ready to be set. The hour will blink,
indicting the hour is ready to be set.
ii) Press the or button to reach
the appropriate hour. If the hour has
passed 12, the indicator switches
from AM to PM.
iii) Once the appropriate hour is reached,
press the ‘OK’ button. The minutes
will blink, indicating that the minutes
are ready to be set.
iv) Press the or button to reach the
appropriate minute.
MENU & pROGRAMMING OpTIONS
v) Once the appropriate minute is
reached, press the ‘OK’ button. The
LCD screen will display ‘OFF TIME’,
indicating that the time you wish the
Brewer to automatically turn off is
ready to be set.
Setting the ‘OFF TIME’
i) Follow the instructions (ii to iv) for
Setting the ‘ON TIME’.
ii) Once the appropriate time is
reached, press the ‘OK’ button. The
LCD screen will return to the menu
programming options
To exit the menu programming options, 5.
press the ‘MENU’ button. Alternatively,
press the button to reach
‘EXIT MENU’ and press the ‘OK’ button.
The LCD screen will return to the main
screen and indicate whether you have
activated the ‘ON-OFF TIME’ feature.
NOTE:
If you want to brew outside the ‘ON
TIME’ and ‘OFF TIME’ selected,
press and release the power Switch
on the lower back, right side of the
Brewer to restore power. You will
have to wait for the water to heat up
before the Brewer is ready to brew.
SETTING ThE ‘AUTO OFF’
FEATURE
This feature automatically turns the Brewer
off after 2 hours from the last brew.
Press the ‘MENU’ button. The 1.
programming options will appear on the
LCD screen with a blinking indicator on
‘CLOCK SET’.
Press the button to reach ‘AUTO OFF’. 2.
Press the ‘OK’ button. 3.
Press the or button to see the 4.
two options:
a) ‘AUTO OFF’ will be ‘INACTIVE’ and
the LCD screen will display ‘- - -’,
indicating that the Brewer will not turn
off automatically. Press the ‘OK’ button
to select this option. The LCD screen
will return to the menu programming
options.
b) ‘AUTO OFF’ will be ‘ACTIVE’ and the
LCD screen will display ‘2 hr’, indicating
the Brewer will automatically turn off
after 2 hours. Press the ‘OK’ button.
The LCD screen will return to the menu
programming options.