Breville XXBKC600XL - Manuel (Page 5)

8 9
OpERATING
your new Breville Gourmet Single Cup Brewer™
OpERATING YOUR BREVILLE GOURMET SINGLE CUp BREwER™
INSTALLING ThE wATER FILTER
For the best tasting gourmet coffee, tea
or hot cocoa, Breville recommends using
bottled or filtered water.
The Water Filter provided with the Brewer
can significantly reduce substances that
affect the smell and taste of water such as
free chlorine, certain pesticides and organic
impurities as well as traces of heavy metals.
NOTE:
The water Filter can be removed
from the Brewer.
If you choose to install the water
Filter, it is recommended to replace
the Charcoal Filter every 2 months
or 60 tank refills, more often if you
have hard water.
we recommend removing the water
Filter if using filtered water, or if you
choose not to replace the Charcoal
Filter every 2 months, as the filter
may clog and affect the smell and
taste of the water.
If you choose not to install the water
Filter, you are ready to start the
One-time priming process (page 10).
NOTE:
Do not use water that has been
treated by a 'water softener'. The
increase in sodium levels in the
water can cause scaling in the
brewer and hinder its performance.
Follow these steps each time you install
a new Charcoal Filter to ensure it filters
optimally.
Remove the Water Tank from the Brewer 1.
by gripping the handle located on the left
side of the Water Tank, then lift upwards.
Remove the Water Tank Lid. 2.
Rinse the Water Tank with fresh water 3.
and replace back onto the Brewer.
Remove the Upper and Lower Filter 4.
Holder and Charcoal Filter from the
polybag. Unwrap the Charcoal Filter from
its protective plastic.
Soak the Charcoal Filter for 5 minutes 5.
then rinse for 30 seconds. It is normal to
see a grey residue after soaking the filter.
Wash the Lower Filter Holder, ensuring 6.
the stainless steel mesh is free of residue.
Insert the Charcoal Filter into the Upper 7.
Filter Holder, then attach the Lower Filter
Holder so it locks into place.