Breville BSB510XL - Manuel (Page 10)

10
ASSEMBLy & OPERATION
5. Work through the ingredients in
the blending jug with a gentle raising
and lowering motion.
6. When processing has finished switch off
the motor by releasing the trigger switch
and remove the power plug from the
power outlet.
7. Ensure the blade has completely
stopped before lifting the stick blender
out of the blending jug.
TO dETACH THE BLENdING SHAfT
Ensure the trigger switch is released and
unplug the power plug from the power outlet.
Hold the motor body with one hand and
using thumb and finger of the other hand,
press on the two EJECT buttons on either
side of the motor body. Pull the motor body
away from the blending shaft to detach.
RECOMMENdATIONS WHEN USING
AS A STICK BLENdER
• The stick blender mixes foods and
liquids rapidly, therefore it is easy to
over-process. Remember to periodically
release the trigger switch and check food
throughout operation.
• Allow food to cool slightly (so not
boiling) before blending.
• The blending shaft allows for hot food
to be processed directly in the saucepan.
This makes blending soups and sauces
very easy. For safety reasons, remove the
saucepan from the heat source before
processing.
• Ensure the motor body of the appliance
and power cord are kept away from any
heat source.
• When pureeing and blending, cut food
into uniform sizes. This will ensure
smooth and consistent results.
• Warm all liquids to be added to
soups and purees, this will ensure
even blending.
• Place the blending jug on the anti-slip
mat during blending. This will keep the
blending jug stable.
• Do not operate the stick blender
continuously for more than 1 minute.
Allow the motor to rest for 1 minute
between each use.
If food becomes lodged around the blending
blade or in the blade guard, follow these
safety instructions:
1. Release the trigger switch and unplug
the power plug from the power outlet.
2. Use a spatula to carefully dislodge the
food. Do not use fingers as the blending
blade is sharp.
3. After the food has been removed and
blades are clear, plug the appliance
back into the power outlet and continue
blending.
BSB510XL_IB_A10_FA.indd 10 5/08/10 9:49 AM