Australian Monitor Zone Revolution - Manuel (Page 8)

Inputs
Each Mic/Line input can be confi gured as either
Microphone level or Line level. The user has options
such as polarity, analog gain sensitivity and digital trim.
Each Mic/Line input also supports full +48V phantom
power.
The Analog gain steps are gain adjustments in the
Analog domain where as the fader represents control
of the DSP domain.
The stereo inputs follow most of the same functions
that relate to line level inputs on the mic/line input.
The page inputs provide a single digital trim fader,
phase invert and mute buttons. Paging Input 1 also
provides a priority enable feature than when enabled
provides priority paging to this input.
Input EQ
Each input has comprehensive EQ functions: high and low
pass fi lters, high and low shelf and two parametric fi lters.
Each EQ can be adjusted in either Q or BW. All processing
is represented on the EQ frequency response graph on the
right hand side of that window.
You can save processing preset fi les for each block from
the EQ onwards. This allows a user to have some preset
EQ fi les such as “Gooseneck Microphone” or “Lapel EQ”.
Dynamics
The dynamics page allows the user to adjust a Noise
Gate for each input and also a Compressor or AGC
for each input. Every block that contains two or more
processing options has an overall “bypass” in red and a
per function “bypass” in blue.
PAGE 6 ZONE REVOLUTION QUICKSTART MANUAL
AUDIO SETUP CONTINUED