Nyrius HDTV Selector Switch - Manuel (Page 4)

- 4 -
SETUP
Connecting your devices
1. Connect the HDMI cable from your display (monitor or TV) to the HDMI-OUT port on the back of
the NSW500.
2. Connect the input sources to the input ports on the back of the NSW500. You can connect 2 HDMI
sources to the HDMI inputs, 2 VGA sources to the VGA inputs and 2 analog sources to the
analog inputs.
3. Plug the power adaptor to an AC power outlet and the smaller end into the DC 5V input on the
back of the NSW500.
4. Turn on the power of the source device you are going to use.
5. Press the POWER button on the front panel of the NSW500. The POWER LED should be on.
6. Check the input indication LED on the front panel of the NSW500. Press the button corresponding
to the input source to select the input source. For example, if you have a device connnected
to the HDMI-IN "1" input, press the key with "1" in the HDMI section on the front panel of the
NSW500.
7. Use the "RESOLUTION" key to adjust the resolution.
8. Use the IR Remote control for more control features.
CONNECTION
Output
Computer IPTV Box
VGA2 VGA1
Television
Blu-Ray player
PS3
IN 1
Power
Adapter
AV2
XBox 360™
AV1
Wii
IN 2