Napoleon Fireplaces EF30 - Manuel (Page 18)

W415-0675 / D / 12.14.11
18
A. Remove the 7 screws from the bottom half of the back
of appliance as illustrated. Remove back plate.
B. Locate the ember bed lamps which are underneath
the fl ame generation cylinder drum.
C. Remove spring clip. Hold socket and pull out old lamp.
D. Hold socket and push in new lamp (DO NOT exceed
wattage or handle with bare hands).
E. Repeat steps C and D for the second lamp.
F. Secure the back plate of the appliance to the main
appliance by reattaching the 7 screws removed from
step A.
7.2 EMBER BED LAMP REPLACEMENT
BACK PLATE
Bulbs with Spring Clips
Flame Generation
Cylinder Drum
LOCATE THE EMBER BED LAMPS
Back View of Appliance
Mantel
EMBER BED LAMP
REPLACEMENT
3 Screws On The Back
2 Screws On
The Side 2 Screws On
The Side
7.3 CARE OF GLASS
5.1
DO NOT CLEAN GLASS WHEN HOT! DO NOT USE
ABRASIVE CLEANERS TO CLEAN GLASS.
Buff lightly with a clean dry soft cloth. Clean both sides
of the glass after the fi rst 10 hours of operation with a
recommended fi replace glass cleaner. Thereafter clean
as required. If the glass is not kept clean permanent
discoloration and / or blemishes may result.
HOT GLASS WILL
CAUSE BURNS.
DO NOT TOUCH GLASS
UNTIL COOLED.
NEVER ALLOW CHILDREN
TO TOUCH GLASS.
!
WARNING